2011-2014 John Deere S-series Combines Reflash
Tier4A Emission Reflash and Horsepower Tuning
We can ship anywhere in North America in 1 business day
Includes 1 year software warranty
Note: Items with expedited shipping ordered after 12 ET will not go out until the following day.
Please take a minute to review our position on Over the Air (OTA) updates.
We have the ability to flash John Deere equipment via our handheld device, or by bench flashing the engine control module. The Reflash Master handheld device is a great way to flash the engine control module (ECM) remotely. This allows Customers to bring the device to the machine, and have the ability to read and write the ECM on site. Bench flashing is a great alternative to the handheld device, this option is available if there is no way to reset the soot levels on site. If a machine is in derate due to high soot levels in the diesel particulate filter, please select the Bench Flashing option. This will allow us to write the ECM, and reset all soot levels while the control module is on the bench. On rare occasions, there may be a situation where the handheld device cannot connect properly to the engine control module due to an overload on the can bus system. This affects the modified file being written onto the control module. When this happens, the engine control module will have to be shipped to us for bench flashing in order to complete the tune. If you have any questions about which option is right for you, please feel free to reach out; email@example.com
- Stage 1 Tune focuses on fuel economy with small torque increase
- Stage 2 Tune focuses on HP and performance with a fuel economy boost
In need of more power?
This is a question that we get asked quite often. If you are in a situation where you feel like the machine you have is lacking in the horsepower department, we can help! When it comes to horsepower increases, the best way to explain it is that we are making the engine more efficient. It produces more power, sooner. When operating the equipment, it will take less load on the engine to get up to speed. This reduced the overall load on the engine, and as a result reduces the amount of fuel required. If there is a situation where more power is needed, you’ll have the extra horsepower available to you! It really is the best of both worlds.
What is an EGR System, and why remove them?
Exhaust Gas Recirculation (EGR) is a method that is used to control Nitrogen Oxides (NOx) emissions. The purpose of this system is to return a small portion of exhaust gases back into the combustion chamber through the intake manifold. Lowering combustion temperature, resulting in a reduction of NOx emissions. The issue with EGR systems is that the valve can stick open due to carbon deposits. A worst case scenario is that the EGR becomes completely blocked, this will result in poor fuel mileage and a loss of power. When this occurs, it results in engine warning lights and the equipment going into limp mode. The vast majority of exhaust gas recirculation valves power off in the closed position. This means that once they are de-energized, they are in the shut position. On a few select applications, we offer block off plates. These plates are used as a fail safe, to ensure that there is no exhaust coming back into the intake system.
What is software tuning?
Software tuning is customized engine management, that is flashed onto your engine control module. This results in an increase of horsepower and torque, while reducing the overall engine load - this helps reduce fuel consumption. Improved torque makes the vehicle more responsive while working with heavy loads. It can also be used to reflash the emissions system that is equipped on a piece of equipment. Some applications have to come to our shop directly to be tuned, however the majority of the equipment on the market today is supported through our handheld device!
Emissions tuning is for off-road use only. Please consult your Provincial or State legislation, as this product may not be street legal. Removal of emissions systems cannot be performed on vehicles that are registered for highway use. It is up to the Consumer to know and understand their local legislation prior to purchasing.
Reimer Tuning is proud to be owned and operated in Canada! We have been around since 2014, and we are excited to work with you! Please feel free to reach out to firstname.lastname@example.org if you have any questions.