CAT Industrial Engine Tune

From $2,495.00

Skip to product information
1 of 2
Engine Model
Emissions Level
CAT Comm Adapter

Regular price $2,495.00
Sale price $2,495.00 Regular price
Shipping calculated at checkout.

Want next day delivery? Be quick!

I18n Error: Missing interpolation value "end_date" for "Ends on {{ end_date }}"
​

CAT Industrial Engine EGR, DPF & DEF Tune

For CAT engines running a generator, a pump or a machine built by another brand. Tier 4A and Tier 4B engines from the C4.4 up are tuned remotely through CAT ET. C3.4 and C3.6 engines, and anything certified to Stage V, are bench flashed in our shop. Either way, the EGR, DPF and DEF systems are switched off in the software. We ship all across the US and Canada.

FitsCAT C3.4 to C18
SystemsEGR · DPF · DEF/SCR
TierTier 4A · Tier 4B · Stage V
MethodRemote or bench flash
AdapterCAT Comm (remote)
Warranty1 year software

Which method fits your engine

Remote tuneCAT ETC4.4 · C7.1 · C9 – C18 · Tier 4A / 4BWe connect to your laptop over TeamViewer and flash the ECM through a CAT Comm adapter. The ECM stays on the engine.
Bench flashSend the ECMC3.4 · C3.6 · any Stage V engineC3.4 and C3.6 engines at any tier, plus every Stage V engine regardless of size, are flashed in our shop. Pull the engine control module and ship it to us, and we program it and send it back.
Emissions tuning onlyWe do not offer horsepower increases for CAT industrial engines. Your engine keeps its factory rating.
​
FIRST, FOR EVERY CAT ENGINESend us a photo of the engine data plateIt is usually on the side of the radiator or in the cab. The plate shows your engine model and tier, so we can tell you which process below to follow.
Email data plate photo

Remote tune

C4.4 and larger · Tier 4A & Tier 4B
STEP 01OrderChoose your engine size and tier, plus a CAT Comm adapter if you need one.
STEP 02ConnectConnect the adapter to the engine’s diagnostic port and start TeamViewer.
STEP 03FlashWe log in, read the ECM through CAT ET and flash the new file.
You’ll need
✓Windows laptop
✓TeamViewer installed
✓Strong internet connection
✓CAT Comm adapter
✓Battery charger
✓Key on, engine off
BEFORE STEP 02Download TeamViewer for WindowsDownload →

C3.4, C3.6 or Stage V? Bench flash instead

C3.4 and C3.6 engines, and any engine certified to Stage V, are programmed in our shop instead of remotely. Once you order, we email the shipping and customs steps. Remove the ECM and mail it to us. We flash it and send it back, ready to reinstall.

After the tune

EXHAUSTHollow out or straight pipe the DPFGut the DPF canister or fit a straight pipe in its place. On Tier 4B engines the DEF catalyst does not restrict flow and can stay on.
EGRBlock-off plate recommendedThe EGR is switched off in software. We recommend sealing the port with a block-off plate on every engine as well, as a backup that keeps the valve from opening after the tune.

Where we tune CAT industrial engines

Generator sets
Irrigation pumps
Air compressors
Chippers & grinders
Crushers & screens
Off-brand machines

Have a CAT engine in something else? Email us the data plate and we will confirm whether we can tune it.

Why delete the EGR, DPF and DEF on a CAT engine?

EGR

Exhaust gas recirculation

A stationary CAT can hold the same load for hours, and the EGR keeps feeding soot-heavy exhaust back into the intake the whole time. Carbon builds up on the valve and in the cooler until the engine throws a code or loses power. Shutting the EGR off sends only fresh air into the cylinders.

DPF

Diesel particulate filter

Pumps and generators often run at light or steady loads that never get the exhaust hot enough for the filter to clean itself. That leads to forced regens, extra fuel burned and an engine that has to be stopped for service. With the DPF off in the file and the canister emptied, those shutdowns are gone.

DEF

Diesel exhaust fluid / SCR

On Tier 4B engines, a remote pump or genset still needs DEF delivered and topped up, and the fluid breaks down if it sits. A failed doser, line heater or NOx sensor can cut power to a unit that nobody is watching. Turning the SCR off removes the fluid and the faults together.

Frequently asked questions

Q1Where do I find the engine data plate?+

On most CAT engines the plate is on the side of the radiator or inside the cab. Take a clear, close photo so every number can be read, and email it to us before you order or right after.

Q2Will my engine be tuned remotely or bench flashed?+

C4.4 and larger engines at Tier 4A or Tier 4B are tuned remotely through CAT ET. C3.4 and C3.6 engines, and any engine certified to Stage V, are bench flashed, so the ECM comes to our shop. The data plate tells us which applies to yours.

Q3I already have a CAT Comm adapter. Can I use it?+

Yes. Choose No Tool at checkout and use the adapter you own. If you need one, choose Tooling Required and we include the adapter and its software.

Q4What do I need for the remote session?+

A Windows laptop with TeamViewer, a strong internet connection and the CAT Comm adapter. Keep the battery charged or put a charger on it, and leave the key on with the engine off while we flash.

Q5What happens to the DPF and the DEF catalyst?+

The DPF has to be hollowed out or replaced with a straight pipe once the tune is done. On Tier 4B engines the DEF catalyst flows freely, so it can stay in place.

Q6Will I need an EGR block-off plate?+

Yes, we recommend one on any engine where the EGR has been deleted. Even with the valve turned off in the file, a block-off plate is a fail-safe that stops it from lifting once the tune is done.

Q7Do you offer horsepower tuning on CAT industrial engines?+

No. This service covers emissions tuning only, and your engine keeps its factory power rating.

Q8How fast do you ship?+

CAT Comm adapters usually ship within 1 business day across the US and Canada. Bench-flashed ECMs go back out once they are programmed, and expedited orders placed after 12 ET ship the next day.

Q9Disclaimer+

Off-road and stationary use only. Not for machines registered for highway use. Buyers are responsible for knowing their state or provincial laws.

Why Reimer Tuning

Whether your CAT is tuned over CAT ET or on our bench, the work is done by our own team in Canada, where we have tuned diesel equipment since 2014. Each file is matched to the engine on your data plate and backed by a 1 year software warranty.

Emailing us? Attach a photo of your engine data plate.

Off-road use only. Not for machines registered for highway use. Buyers are responsible for knowing their provincial or state legislation. All sales final.

CAT Industrial Engine Tune

$2,495.00


Questions about this product?
Talk to a member of our team