CAT Excavators Software Reflash

From $2,495.00

Skip to product information
1 of 2
Reflash Options
Tooling

Regular price $2,495.00
Sale price $2,495.00 Regular price
Shipping calculated at checkout.

Want next day delivery? Be quick!

I18n Error: Missing interpolation value "end_date" for "Ends on {{ end_date }}"
​

CAT Excavator EGR, DPF & DEF Tune

From the 320 up to the 352, every CAT excavator covered here runs a C4.4 or larger engine, so most are tuned remotely through CAT ET without pulling the ECM. Stage V machines are the exception and get bench flashed in our shop. In both cases the EGR, DPF and DEF systems are turned off in the engine software. We ship all across the US and Canada.

FitsCAT 320 to 352 excavators
SystemsEGR · DPF · DEF/SCR
TierTier 4A · Tier 4B · Stage V
MethodRemote (bench for Stage V)
AdapterCAT Comm (remote)
Warranty1 year software
Emissions tuning onlyHorsepower tunes are not available for CAT excavators. Your machine keeps its factory power rating.
​
FIRST, FOR EVERY EXCAVATORSend us a photo of the engine data plateFind it on the side of the radiator or in the cab. It tells us your engine and tier, and which process below applies.
Email data plate photo

Remote tune

Tier 4A & Tier 4B
STEP 01OrderPick your tier. Add a CAT Comm adapter if you need one.
STEP 02ConnectPlug the adapter into the diagnostic port and open TeamViewer.
STEP 03FlashWe read the ECM in CAT ET and write your new file.
You’ll need
✓Windows laptop
✓TeamViewer installed
✓Strong internet connection
✓CAT Comm adapter
✓Battery charger
✓Key on, engine off
BEFORE STEP 02Download TeamViewer for WindowsDownload →

Stage V? Bench flash instead

Stage V excavators cannot be tuned remotely. After you order, we email shipping and customs details. Pull the ECM and send it to us, we program it in our shop, and you bolt it back in when it returns.

After the tune

EXHAUSTHollow out or straight pipe the DPFEmpty the DPF canister or replace it with a straight pipe. On Tier 4B excavators the DEF catalyst flows freely and stays on.
EGRBlock-off plate recommendedYour EGR is shut off in the file, but we still suggest fitting a block-off plate over the port. It is a simple backup that keeps the valve from lifting after the tune.

CAT excavators we tune

D, E and F series from 2011 on, plus the next-generation machines built from 2018.

320D · D2 · E · F · Next gen · GC
323D · F · Next gen
324D · E · F
325D · F · Next gen
326D · F · Next gen
329D · E · F
330D · D2 · E · F · Next gen · GC
335Next gen
336D · E · F · Next gen · GC
340D · F · Next gen
345D
349D · F · Next gen
350Next gen
352Next gen

Not sure where your excavator fits? Send us the data plate photo and we will confirm before you order.

Why delete the EGR, DPF and DEF on a CAT excavator?

EGR

Exhaust gas recirculation

Digging and trenching keep an excavator engine under heavy, changing load all day, and the EGR keeps routing exhaust back through the cooler and intake. Over time that soot turns into carbon that sticks the valve and plugs the cooler. Codes and lost hydraulic response follow. With the EGR off, the engine breathes clean air.

DPF

Diesel particulate filter

Excavators spend a lot of time idling between trucks or swinging at part throttle, which loads the filter faster than it can clean itself. The result is parked regens that stop the machine and burn extra fuel, and eventually a filter that needs pulling. Turn the DPF off and empty the canister, and the machine keeps digging.

DEF

Diesel exhaust fluid / SCR

A Tier 4B excavator needs DEF hauled to the job site, and the fluid can freeze in winter or go bad in a hot tank. When a pump, heater or NOx sensor fails, the engine derates and the whole crew waits. Shutting the SCR off ends the refills and the derates together.

Frequently asked questions

Q1Where is the data plate on a CAT excavator?+

Check the side of the radiator first, then inside the cab. Email us a sharp, close-up photo where every line can be read, either before you order or right after.

Q2Is my excavator tuned remotely or bench flashed?+

Tier 4A and Tier 4B excavators are tuned remotely through CAT ET with the ECM left in place. Stage V excavators must be bench flashed, so the ECM is shipped to us. Your data plate tells us which one you have.

Q3Can I use my own CAT Comm adapter?+

Yes. Pick No Tool at checkout if you already have one. If not, choose Tooling Required and we send the adapter with its software.

Q4What do I need ready for the remote tune?+

A Windows laptop with TeamViewer, a strong internet connection and the CAT Comm adapter. Keep the batteries charged or hook up a charger, and have the key on with the engine off during the flash.

Q5What do I do with the DPF and DEF catalyst?+

Hollow out the DPF or swap in a straight pipe after the tune. On Tier 4B machines the DEF catalyst does not restrict flow, so it stays on.

Q6Does my excavator need an EGR block-off plate?+

We recommend it on every excavator where the EGR has been deleted. The plate is a fail-safe: if the valve ever lifts after the tune, no exhaust can get back into the intake.

Q7Can you add horsepower to my CAT excavator?+

No. We offer emissions tuning only on CAT excavators, and the engine keeps its factory rating.

Q8How fast do you ship?+

CAT Comm adapters usually ship within 1 business day across the US and Canada. Bench-flashed Stage V ECMs are returned as soon as they are programmed. Expedited orders placed after 12 ET ship the next day.

Q9Disclaimer+

Off-road use only. Not for machines registered for highway use. Buyers must know their state or provincial laws before ordering.

Why Reimer Tuning

Our Canadian team has been tuning heavy equipment since 2014, and every CAT excavator file is built for the engine listed on your data plate. Remote or bench, the work is done in house and carries a 1 year software warranty.

Emailing us? Attach a photo of your engine data plate.

Off-road use only. Not for machines registered for highway use. Buyers are responsible for knowing their provincial or state legislation. All sales final.

CAT Excavators Software Reflash

$2,495.00


Questions about this product?
Talk to a member of our team