CAT Dozer Software Reflash

From $2,495.00

Skip to product information
1 of 2
Reflash Options
Tooling

Regular price $2,495.00
Sale price $2,495.00 Regular price
Shipping calculated at checkout.

Want next day delivery? Be quick!

I18n Error: Missing interpolation value "end_date" for "Ends on {{ end_date }}"
​

CAT Dozer EGR, DPF & DEF Tune

Whether it is a D4 finishing grade or a D8 pushing rock, a Tier 4 CAT dozer can be tuned remotely through CAT ET while the ECM stays bolted in. Only Stage V dozers have to come off the machine for a bench flash in our shop. Either way, the EGR, DPF and DEF systems are switched off in software. We ship all across the US and Canada.

FitsCAT D4 to D8 dozers
SystemsEGR · DPF · DEF/SCR
TierTier 4A · Tier 4B · Stage V
MethodRemote (bench for Stage V)
AdapterCAT Comm (remote)
Warranty1 year software
Emissions tuning onlyWe do not offer horsepower tunes for CAT dozers. Your machine keeps the power it left the factory with.
​
FIRST, FOR EVERY DOZERSend us a photo of the engine data plateCheck the side of the radiator or inside the cab. The plate shows us your engine and emissions tier, which decides the process you follow below.
Email data plate photo

Remote tune

Tier 4A & Tier 4B
STEP 01OrderSelect your tier, and add a CAT Comm adapter if you do not own one.
STEP 02ConnectHook the adapter to the dozer’s diagnostic port and launch TeamViewer.
STEP 03FlashWe connect, pull the ECM file in CAT ET and write the tuned version.
You’ll need
✓Windows laptop
✓TeamViewer installed
✓Strong internet connection
✓CAT Comm adapter
✓Battery charger
✓Key on, engine off
BEFORE STEP 02Download TeamViewer for WindowsDownload →

Stage V? Bench flash instead

A Stage V dozer has to be flashed on our bench. Once you order, we send the shipping and customs instructions by email. Remove the ECM, mail it in, and reinstall it when it comes back programmed.

After the tune

EXHAUSTHollow out or straight pipe the DPFGut the DPF or put a straight pipe in its place. On Tier 4B dozers the DEF catalyst is free-flowing and stays installed.
EGRBlock-off plate recommendedThe EGR is disabled in software during the tune. Adding a block-off plate over the port is our recommended fail-safe, so the valve can never reopen later.

CAT dozers we tune

Tier 4 K, N, T and E series dozers, plus the next-generation D4 to D8.

D4Next gen
D5D5R2 · Next gen
D6D6K · D6K2 · D6N · D6T · Next gen
D7D7E · Next gen
D8D8T · Next gen

Have a different CAT dozer? Email the data plate photo and we will check it for you.

Why delete the EGR, DPF and DEF on a CAT dozer?

EGR

Exhaust gas recirculation

A dozer pushing a full blade loads its engine hard for hours, and the EGR keeps sending hot, sooty exhaust back into the intake. Carbon builds in the cooler and on the valve, and a dozer working in dust and heat is quick to show it. Expect codes, coolant problems and a derate. Turning the EGR off keeps the intake clean.

DPF

Diesel particulate filter

Finish grading, light spreading and long idle stretches keep exhaust temperatures low, so the filter loads up faster than it burns clean. Soon the dozer is parked for a regen, burning fuel while the site waits. A filter that keeps plugging has to be pulled for cleaning. With the DPF off in software and the canister emptied, the blade keeps moving.

DEF

Diesel exhaust fluid / SCR

Tier 4B dozers often work far from the shop, so every jug of DEF has to be hauled to the site. Fluid that freezes or sits too long sets quality faults, and a failed doser, heater or NOx sensor drops power right in the middle of a push. Turning the SCR off removes the DEF and the derates with it.

Frequently asked questions

Q1Where is the data plate on a CAT dozer?+

Most dozers have it on the side of the radiator, and some have it in the cab. Send us a sharp, close photo so every line can be read, before you order or right after.

Q2Will my dozer be tuned remotely or bench flashed?+

Tier 4A and Tier 4B dozers are tuned remotely through CAT ET, and the ECM stays in the machine. Stage V dozers are bench flashed, so the ECM is mailed to us. Your data plate tells us which applies.

Q3I have my own CAT Comm adapter. Can I use it?+

Yes. Choose No Tooling at checkout. If you need one, select Tooling Required and we ship the adapter and its software.

Q4What should I have ready for the remote session?+

A Windows laptop with TeamViewer, a strong internet connection and the CAT Comm adapter. Have a battery charger connected, and keep the key on with the engine off while we flash.

Q5What do I do with the DPF and DEF catalyst?+

The DPF must be hollowed out or replaced with a straight pipe after the tune. The DEF catalyst on Tier 4B dozers does not restrict flow, so leave it in place.

Q6Will my dozer need an EGR block-off plate?+

Yes, we recommend fitting one on any dozer with the EGR deleted. It backs up the software change, so the valve cannot lift and route exhaust into the intake after the tune.

Q7Can you increase horsepower on my CAT dozer?+

No. Our CAT dozer service is emissions tuning only, and the engine keeps its factory rating.

Q8How fast do you ship?+

CAT Comm adapters usually ship within 1 business day to the US and Canada. Stage V ECMs go back out as soon as they are flashed. Expedited orders placed after 12 ET ship the next day.

Q9Disclaimer+

Off-road use only. Not for any machine registered for highway use. Buyers are responsible for knowing their state or provincial laws.

Why Reimer Tuning

We are a Canadian shop that has been tuning heavy equipment since 2014. Each CAT dozer file is written in house for the engine on your data plate, whether we flash it remotely or on the bench, and it comes with a 1 year software warranty.

Emailing us? Attach a photo of your engine data plate.

Off-road use only. Not for machines registered for highway use. Buyers are responsible for knowing their provincial or state legislation. All sales final.

CAT Dozer Software Reflash

$2,495.00


Questions about this product?
Talk to a member of our team