2012-2014 Bobcat Skid Steer Reflash

From $2,495.00
Reflash Options
Horsepower Tune
Tooling
$2,495.00
$2,495.00
Shipping calculated at checkout.

Want next day delivery? Be quick!

I18n Error: Missing interpolation value "end_date" for "Ends on {{ end_date }}"
 

Bobcat 2012–2014 DPF & EGR Delete Tune

Built for the Kubota-powered Bobcat skid steers and track loaders from 2012 to 2014. Plug our Reflash Master handheld into the diagnostic port, flash the ECM on site, and the DPF and EGR stop dictating your workday. Your ECM stays in the machine the whole time. A Stage 1 tune adds 10% more power on top. We ship all across the US and Canada.

FitsBobcat S/T 550–870, 2012–2014
SystemsEGR and DPF
TierTier 4 Interim
MethodReflash Master handheld
TurnaroundTuned file in 2 hours
Power+10% (110 hp on T870)
2015 OR NEWER?Bobcat machines built from 2015 on use a different emissions setup and a mail-in reflash. See the 2015–Present kit.View →

Horsepower tune · Bobcat T870

Stock100HP
 
Factory rating
Stage 1110HP
 
+10 hp · +10%

T870 figures shown. Every covered model gets the same 10% gain over its factory rating.

Fits these Bobcat machines

KUBOTA V2607S550 · S570 · S590 · T550 · T570 · T590
KUBOTA V3307S630 · S650 · T630 · T650
KUBOTA V3800S750 · S770 · T750 · T770 · T870
 

Kit includes

01Reflash Master handheld device
02USB cable and diagnostic cable
03Quick Reference Guide
04DPF removal instructions by email

No piping is offered for these machines.

Handheld tuning process

STEP 01OrderWe pack and ship your Reflash Master kit, normally the next business day.
STEP 02ReadConnect at the Bobcat diagnostic port and pull a copy of the stock ECM file.
STEP 03SendEmail that file to our team. Expect the tuned version in roughly 2 hours.
STEP 04WriteFlash the new file from the cab, key off, and the loader is ready to go.
VIDEO TUTORIALSee the Reflash Master in actionWatch →

Why delete the DPF and EGR on a Bobcat 2012–2014?

DPF

Diesel particulate filter

Grading, sweeping and short idle-heavy jobs never get the exhaust hot enough to clean the filter on its own. The Bobcat then asks for a stationary regen, burns fuel doing it, and eventually the ash load means a pricey filter service. Shut the DPF off in the file, pull the filter out, and regens stop being part of the job.

EGR

Exhaust gas recirculation

Routing hot, dirty exhaust back through the intake coats the EGR valve and cooler with carbon. A sticking valve on these Kubota engines shows up as rough running, fault codes and a derate right when you need full power. Our tune closes the valve in software, so no block off plate is required.

Why tune with a handheld?

Your Bobcat gets flashed where it sits, so you are not pulling the ECM or paying to ship it anywhere.

01No shipping downtimeThe loader stays on the jobsite and keeps earning right up to the moment you flash it.
02Yours to keepThe handheld stays with you, and the saved stock file lets you return to factory settings any time.
03Fast turnaroundMost files are tuned and emailed back within about 2 hours of us receiving them.

Frequently asked questions

Q1Why choose Reimer Tuning for my Bobcat 2012–2014?+

Each Bobcat file is built by our own team for the Kubota V2607, V3307 and V3800, and every tune carries a 1 year software warranty. Files usually come back in about 2 hours, and you can call us anytime you get stuck.

Q2Can the handheld tune another machine later?+

Yes. You keep the Reflash Master, and we can unlock it on our server for an additional machine. Get in touch and we will set it up.

Q3Can I take the DPF filter out?+

Yes. The tune disables the DPF and its sensor readings, and we email detailed steps for removing the filter from the canister.

Q4Do I need to keep the exhaust sensors plugged in?+

Leave the exhaust temperature sensors connected, since they hold CAN bus resistance. The pressure sensor can stay unplugged, and none of the sensors have to sit in the exhaust stream. Secure the harness so it cannot rub or melt.

Q5Does the Stage 1 tune burn more fuel?+

Not necessarily. Stage 1 raises the fuel map evenly, so torque comes in earlier. At the same workload the engine runs at lower load, which can cut fuel use, and the extra power is there for heavy digging.

Q6Do you ship to the US and Canada?+

Yes. Kits go out to both countries, typically the next business day when you choose overnight shipping.

Q7Disclaimer+

This product is for off-road use only and cannot be used on machines registered for highway use. Check your provincial or state legislation before purchasing.

Why Reimer Tuning

We write and test every Bobcat file in house and stand behind it with a 1 year software warranty. Canadian owned and tuning since 2014, with a real tech on the line when you call.

Off-road use only. Not for machines registered for highway use. Buyers are responsible for knowing their provincial or state legislation. All sales final.

2012-2014 Bobcat Skid Steer Reflash

$2,495.00

Questions about this product?
Talk to a member of our team

Email Us